skid steer grapples | grapple rakes

Faver rake and claw tines are cut from 180,000 psi tensile steel, much stronger and wear resistant than T-1 steel and the rake tines are a full 1.25" thick. Extreme strength eliminates the need for bracing at tine ends leaving them open to lose dirt while raking. Maximum grapple performance is first provided by cylinders boasting a full 4" bore x 10" stroke giving the dual claws unmatched clamping power. The 3000 psi cylinders are then covered with extremely tough clamp style covers, built from solid plate. Faver's grapple claws were carefully designed for ultimate ruggedness and to bite incredibly hard in all positions. Overall maximum toughness is enhanced further by incorporating a new breakthrough design quick attach mount built directly into the main frame of the brush rake. Ultimate performance in highly abusive applications, Faver is dependable high performance equipment.

Faver rake and claw tines are cut from 180,000 psi tensile steel, much stronger and wear resistant than T-1 steel and the rake tines are a full 1.5" thick. Extreme strength eliminates the need for bracing at tine ends leaving them open to lose dirt while raking. Maximum grapple performance is first provided by cylinders boasting a full 5" bore x 12" stroke giving the dual claws unmatched clamping power. The 3000 psi cylinders are then covered with extremely tough clamp style covers, built from solid plate. Faver's grapple claws were carefully designed for ultimate ruggedness and to bite incredibly hard in all positions. Overall maximum toughness is enhanced further by incorporating a new breakthrough design quick attach mount built directly into the main frame of the brush rake. Ultimate performance in highly abusive applications, Faver is dependable high performance equipment.

Faver rake and claw tines are cut from 180,000 psi tensile steel, much stronger and wear resistant than T-1 steel and the rake tines are a full 2" thick. Extreme strength eliminates the need for bracing at tine ends leaving them open to lose dirt while raking. Maximum grapple performance is first provided by cylinders boasting a full 6" bore x 16" stroke giving the dual claws unmatched clamping power. The 3000 psi cylinders are then covered with extremely tough clamp style covers, built from solid plate. Faver's grapple claws were carefully designed for ultimate ruggedness and to bite incredibly hard in all positions. Overall maximum toughness is enhanced further by incorporating a new breakthrough design quick attach mount built directly into the main frame of the brush rake. Ultimate performance in highly abusive applications, Faver is dependable high performance equipment.

Faver rake and claw tines are cut from 180,000 psi tensile steel, much stronger and wear resistant than T-1 steel and the rake tines are a full 1" thick. Extreme strength eliminates the need for bracing at tine ends leaving them open to lose dirt while raking. Maximum grapple performance is first provided by cylinders boasting a full 3" bore x 8" stroke giving the dual claws unmatched clamping power, most designs use 2". The 3000 psi cylinders are then covered with extremely tough clamp style covers, built from 3/8" solid plate. Faver's grapple claws were carefully designed for ultimate ruggedness and to bite incredibly hard in all positions. Overall maximum toughness is enhanced further by incorporating a new breakthrough design quick attach mount built directly into the main frame of the brush rake. Ultimate performance in highly abusive applications, Faver is dependable high performance equipment.