Home

1" Thick Super High Strength steel tines are both extra strong and extra wear resistant. Tines are cut from high
tensile steel plate boasting a yield strength of 140,000 p.s.i. as compared to mild steel with a yield strength of 36,000 p.s.i.
Due to the Ultra High tensile steel no bracing is needed at the tine ends leaving them open to lose unwanted debris while raking.
Grapple tines and side gussets are made of the same Ultra High Tensile steel as the bottom rake tines.
Uncommonly large cylinders provide unmatched crushing power.
The extra tight 12.5" closing increases load stability and maneuverability when handling material such as small logs.
Hose guide helps protect supply hoses from pinch points.
Cylinder covers are built extreme. Cut from 3/8" thick plate and securely clamped.
Cylinder rod pushes directly into cross tube. The superior design prevents tube twisting and mount failure due to excessive loading.
Mount is exponentially enhanced through additional cross tube supporting members.
ylinder mounts are built from 3/4" premium stock. The impressively strong supports are perfectly matched to the uncommonly large 3" cylinders. Mounts further serve as a positive stop for the grapple claws which directly increase cylinder life.
Extra long greasable pivot points minimize friction and extend life.

1" Thick Super High Strength steel tines are both extra strong and extra wear resistant. Tines are cut from high
tensile steel plate boasting a yield strength of 140,000 p.s.i. as compared to mild steel with a yield strength of 36,000 p.s.i.
Due to the Ultra High tensile steel no bracing is needed at the tine ends leaving them open to lose unwanted debris while raking.
Grapple tines and side gussets are made of the same Ultra High Tensile steel as the bottom rake tines.
Uncommonly large cylinders provide unmatched crushing power.
The extra tight 11" closing increases load stability and maneuverability when handling material such as small logs.
Hose guide helps protect supply hoses from pinch points.
Cylinder covers are built extreme. Cut from 3/8" thick plate and securely clamped.
Cylinder rod pushes directly into cross tube. The superior design prevents tube twisting and mount failure due to excessive loading.
Mount is exponentially enhanced through additional cross tube supporting members.
ylinder mounts are built from 3/4" premium stock. The impressively strong supports are perfectly matched to the uncommonly large 3" cylinders. Mounts further serve as a positive stop for the grapple claws which directly increase cylinder life.
Extra long greasable pivot points minimize friction and extend life.
All models are also available without the universal skid steer quick attach mount for ease of adaption to other equipment.
Cylinder rod shroud shields away damaging debris and increases structural strength.

Faver rake and claw tines are cut from 180,000 psi tensile steel, much stronger and wear resistant than T-1 steel and the rake tines are a full 1" thick. Extreme strength eliminates the need for bracing at tine ends leaving them open to lose dirt while raking. Maximum grapple performance is first provided by cylinders boasting a full 3" bore x 8" stroke giving the dual claws unmatched clamping power, most designs use 2". The 3000 psi cylinders are then covered with extremely tough clamp style covers, built from 3/8" solid plate. Faver's grapple claws were carefully designed for ultimate ruggedness and to bite incredibly hard in all positions. Overall maximum toughness is enhanced further by incorporating a new breakthrough design quick attach mount built directly into the main frame of the brush rake. Ultimate performance in highly abusive applications, Faver is dependable high performance equipment.